Contactsitemap

Hello, welcome to the website of Dongguan Gaoshang Machinery Co., Ltd!

公众号二维码

Dongguan Gaoshang Machinery Co., Ltd.

Dongguan Gaoshang Machinery Co., Ltd. High-end heat press machine takes you!

中文英文 support hotline 400-6556-156
高尚机械
Contact Us

0769-86866158

Phone: 400-6556-156

E-mail:13925556156@163.com

Address:No. 45 Mango Lane, Xintang, Chashan Town, Dongguan City, Guangdong Province

current location: Home » English > Products > Hydraulic heat transfer >

Hydraulic double station sublimation heat printing machine

Service Hotline:400-6556-156
立即咨询
Details

 

液压大幅面热转印机01
The high level hydraulic double station sublimation can transfer the color patterns of sublimation, solvent ink and ink to cotton, hemp, chemical fiber, nylon and other fabrics and ceramic products. It also can be used for heat treatment, such as hair burning and foaming printing, and the bonding of low temperature and low pressure lining with the fabric, such as clothing, shoes and hats, etc., and also for the production of small batch handkerchiefs.
Technical parameters:
Voltage: 220/380V
Power: 12KW
Temperature range: 0-399 degrees centigrade
Time range: 0-99.9H
Stroke distance of cylinder: 125cm
Work pressure: 0-100kg/cm2
Workbench size: 120*150cm
Shape size: 3860*2200*1490mm
Package size: 1510*1050*1630mm
Gross weight: 800KG
The characteristics of the product:
1, the electrical control of the machine adopts the latest advanced technology, imported components, automatic limit, accuracy, safety, high reliability and long service life.
2, electronic digital constant temperature control, high precision (+ 1-2 degrees).
3, time electronic control, high accuracy;
4, heating and heating plate adopts advanced technology, with uniform heat conduction and strong thermal conductivity.
 
Operation process:
Note: This machine must have a suitable and safe ground to protect the ground
1, assemble the bottom board, connect the aviation plug and open the motor button.
2, connect the power cord, turn on the main switch, and the power indicator lights up.
3, adjust the time and temperature required.
A: adjust the thermometer: through button down regulation of the required temperature, generally about 200 degrees;
B: adjust the timetable: generally 25 seconds or so, the unit is seconds, and adjust the time required by the up and down.
4, after adjusting the temperature and time, wait for the machine to heat up.
5, after heating up, the setting temperature will reach the green light.
6, switch the switch to the "manual" position, press the desired product, and then convert it to "automatic" location and batch production.
7, when the switch to "manual" position, press the "start switch" heating plate with hand downward pressure when the time to automatic rise, such as hot stamping process found that the position is wrong, then press "emergency stop" stop hot pressure, when the switch to "automatic" position, only the heating plate is put in place, the heating plate automatic down pressure.
8, put the clothes on the sponge pad, push the work table to the hot press position, press the start switch, press the articles, put on the hot drawing paper, (pay attention to the opposite side of the hot drawing paper), press the start switch, start the stamping and the time reverse.
9, hot stamping is finished, the heating plate rises automatically, and the working surface is pulled out.
10. Take out the ironed items. If the hot tear paper is cold, please wait 5-10 seconds to tear up the hot paper. If it is the hot tear hot paper, if the hot stamping is finished, please tear the ironing paper immediately.
Repair:
1. pressure: if the pressure is not enough or too big, the wire rod regulating valve on the highest position on the adjustable motor uses the six angle wrench in M6 to increase the pressure in clockwise direction, reduce the pressure in the direction of clockwise, and adjust the pressure to 0-30, and then lock the M12 nut after adjusting.
2. temperature: when the heating plate is not heated or the heat is not uniform after the equipment is fixed, the circuit temperature controller and the thermocouple should be checked, if the thermocouple is broken, then a breakage indicator on the thermostat is bright, then the thermocouple should be changed.
3. time: when the switch to "manual", press "manual start" will not check the "manual" switch, when the switch to "automatic", the plate will not be under pressure when it is in place, should check the contact point of the micro switch in the box, if not in place, it should be adjusted.
The temperature and time required for stamping are as follows:
Cotton clothes: 180-220 degrees, 25 seconds
Polyester clothing: 180 degrees, 15 seconds
Pearlite: 180 degrees, 120--180 seconds
Metal pendant: 180 degrees, 60 seconds
Mouse pad: 180 degrees, 15 seconds
Porcelain: 200 degrees, 180 seconds
Key button: 180 degrees, 100 seconds
Ceramics: 180-220 degrees, 180 seconds

 
 
 
<script type="text/javascript"> productLoad(); $('.soleft li>a').hover(function () { $(this).addClass('move') $(this).css("color", "#fff"); $(this).stop().animate({ "left": "20" }, 500) }, function () { $(this).removeClass('move') $(this).css("color", "#666"); $(this).stop().animate({ "left": "0" }, 500) }) if (SID.indexOf("0001,0006") > -1) { $(".nav li").removeClass("cur"); $(".nav li").eq(1).addClass("cur"); } else if (SID.indexOf("0001,0007") > -1) { $(".nav li").removeClass("cur"); $(".nav li").eq(2).addClass("cur"); } else if (SID.indexOf("0001,0008") > -1) { $(".nav li").removeClass("cur"); $(".nav li").eq(3).addClass("cur"); }</script>

手机二维码

Copyright reserved by Dongguan Gaoshang Machinery Co., Ltd.
Address: No. 45 Mango Lane, Xintang, Chashan Town,
Dongguan City, Guangdong Province
Tel: 0769-86866158 400-6556-156
Email: 13925556156@163.com